Winter Weather – Property Protection

Cold weather freeze-ups can cause vital fire protection systems to malfunction. Cold temperatures can cause sprinkler piping to burst resulting in major water damage to buildings, contents, and equipment. Pipes bursting can also impair automatic sprinkler systems and leave a major portion of your facility without fire protection.

In the interest of preventing water damage claims for your property, designated key personnel should be aware of freeze protection and emergency preparedness procedures. Utilize Winter Weather Precautions Checklist and Risk Management Guidebook to assist you in building a sound risk control program.

Best Practices include: Building temperature should be monitored, documented and maintained @ 40 F or higher
Perform freeze protection inspections and be cognizant of shutdown procedures
Have a contingency plan with contractors and suppliers
Pre-emergency planning for fire, water damage and snow removal should be established
Boilers, furnaces, heaters and flues should be serviced regularly
24 hour building surveillance
Enforce a no smoking policy
Safeguard flammable or combustible liquids

Water Supplies
Tanks should not leak and pressure should be checked
Water temperature should remain at 42 F or above
Check fire hydrants for proper drainage by outside contractor or water department
Buried sprinkler control valves and valve pits should be marked in the event of heavy snowfall
Fire pump room should not drop below 70 F
Regularly inspect post indicator valve, OS&Y valve, and test header to pump

Wet Pipe Sprinkler Systems
All areas of buildings with sprinkler systems should maintain a temperature of 40 F or above
Cold weather valves should be closed while all others remain open
Windows, skylights and doors should be in good condition and sealed tightly
Check temperatures with thermometer

Dry Pipe Systems
Dry lines should be checked for proper drainage so trapped water doesn’t cause breakage
Check drains located in cold places for freezing
Dry-valve clapper should be properly set with temperature maintained at 40 F or above
Low air pressure alarms should be provided, calibrated and connected to constantly
attended locations
Low pressure switches should be set at 5 psi which is above trip point of dry pipe valve
Air pressure checked regularly with records maintained to indicate normal pressure
Air drying equipment available to supply air to system as designed

PREVENTING HEAVY ROOF LOADING & COLLAPSE
Snow and ice build up can wreak havoc by placing additional loads on roofs and supporting bearing members. Snow and winter storm event severity can be hard to predict depending on the location and geography of your facilities. It is best practice to plan ahead and have a written plan in place when the snow or ice arrives.

Roofs collapse mainly due to weather patterns that produce a cycle of 2 events:
a rapid freeze
a rapid thaw

This rapid freeze and thaw cycling produce weighty snow/ice buildup that places excess stress on your roof. Flat roofs are especially prone to excessive accumulation and build up by the lack of natural grading, pitch and lack of runoff.

Best practices include
Maintain all roofs and keep current with repairs. Winter weather will only further damage any underlayment and the damaging effects of water infiltration will be costly and may cause business interruptions.

Arrange to have all roofs cleared of snow especially where snow drifts are visible. Hire a competent contractor for this dangerous task.

Request contractor to clear any and all roof drains to allow for runoff and limit ponding especially on flat or relatively shallow pitched roofs. Clear pathways to the eaves in situations where there is a pitched roof without drainage pipes.

PREMISES AND FIRE FIGHTING EFFORTS
Removal of accumulation of snowfall from your driveways, sidewalks and entryways is essential to maintain safe access to your facility by emergency responders.

Clear all driveways, sidewalks, parking areas, access ways, bulkheads, portals, entryways and exits to allow for emergency personnel to safely access your premises. Fire hydrants should be accessible and clearly marked with colored marker flags in high snow drifts.

Unoccupied buildings
Vacant, idle or otherwise “unoccupied” buildings or large buildings with unused space (compartments, floors, rooms or basements, etc.) present another set of hazards that an organization must consider for best practice winter weather controls.

Inadvertent releases of water, left unchecked or allowed to flow unnoticed, usually results in extensive interior damage.

Best practices for these situations involve
Maintain fire protection services including water based fire protection services
(sprinklers) – consult your contractor to maintain these systems in service
Maintain interior heat at 40 F or above
Maintain remote (electronic) monitoring of indoor temperatures
Visit and survey daily to verify conditions of building or space
Install water alarms to detect release of water, burst pipe, etc.

Unheated Space
Close main water valves with potable/domestic water
Contract a plumbing professional to drain all piping from water heaters, faucets and
supply piping
Notify proper authorities when plans call for fire protection system (sprinkler) impairment
 
 
Courtesy of  PHLY.com

3 thoughts on “Winter Weather – Property Protection

  1. Toney Head

    I used to be very happy to search out this internet-site.I wanted to thanks to your time for this glorious learn!! I positively having fun with each little bit of it and I have you bookmarked to check out new stuff you blog post.

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s